Design for performance, Part 2: Reduce object creation - JavaWorld February 2001


Articles Index


Though many programmers put off performance management until late in the development process, performance considerations should be integrated into the design cycle from day one. This series explores some of the ways in which early design decisions can significantly affect application performance. In this article, I continue to explore the problem of excessive temporary object creation and offer several proven techniques for avoiding their creation.

Read the whole "Design for Performance" series:

Temporary objects are those that have a short lifetime and generally serve no useful purpose other than to act as containers for other data. Programmers generally use temporary objects to pass compound data to -- or return it from -- a method. Part 1 explored how temporary object creations could have a serious negative impact on a program's performance and showed how certain class interface design decisions virtually guarantee temporary object creation. By avoiding those interface constructs, you can dramatically reduce the need to create temporary objects that can sap your program's performance.

Just Say No to String?
When it comes to creating temporary objects, the String class is one of the biggest offenders. To illustrate that, in Part 1 I developed an example of a regular expression-matching class and showed how a harmless-looking interface imposed enough object-creation overhead to make it run several times slower than a similar class with a more carefully designed interface. Here are the interfaces for both the original and the better-performing classes:


public class BadRegExpMatcher { 

  public BadRegExpMatcher(String regExp);

  /** Attempts to match the specified regular 
      expression against the input
      text, returning the matched text if
      possible or null if not */
  public String match(String inputText);


class BetterRegExpMatcher { 
  public BetterRegExpMatcher(...);

  /** Provide matchers for multiple formats of 
  input -- String,
      character array, and subset of 
      character array.  
      Return -1 if no match was made; 
      return offset of match start if a match was
      made.  */
  public int match(String inputText);
  public int match(char[] inputText);
  public int match(char[] inputText, int offset, 
  int length);

  /** If a match was made, returns the length of 
  the match; 
      between the offset and the length, the 
      caller should
      be able to reconstruct the match text 
      from the offset
      and length */
  public int getMatchLength();

  /** Convenience routine to get the 
  match string, 
      in the event the caller happens 
      to wants a String */
  public String getMatchText();

Programs that heavily use BadRegExpMatcher will run slower than those using BetterRegExpMatcher. First, callers have to create a String object to pass into match(), which then has to create another String object to return the matched text to the caller. That results in at least two object creations per invocation, which may not sound like much, but if you call match() frequently, the performance overhead of those object creations can really add up. The problem with BadRegExpMatcher's performance is not in its implementation but in its interface; with the interface defined as it is, there is no way to avoid creating several temporary objects.

BetterRegExpMatcher replaces the String objects in match() with primitive types (integers and character arrays); no intermediate objects need to be created to pass information from the caller to match() and back.

Since it is generally easier to avoid performance problems at design time than to fix them after you've written your entire program, you should watch out for the ways in which your class interfaces might mandate object creation. In the case of RegExpMatcher, the fact that its methods require and return String objects should provide a warning sign for potential performance hazards. Since the String class is immutable, all but the most trivial processing of a String argument will require the creation of a new String for every invocation.

Is Immutability Necessarily Bad for Performance?
Because String is so commonly associated with excessive object creation, which is generally ascribed to its immutability, many programmers assume that immutable objects are inherently bad for performance. However, the truth is somewhat more complicated. Actually, immutability can sometimes offer a performance advantage, and mutable objects can sometimes cause performance problems. Whether mutability is helpful or harmful for performance depends on how the object is used.

Programs frequently manipulate and modify text strings -- which is a bad match for immutability. Every time you want to manipulate a String -- like finding and extracting a prefix or substring, converting it to upper- or lowercase, or combining two strings into a new one -- you must create a new String object. (And in the case of concatenation, the compiler creates a hidden temporary StringBuffer object, too.)

On the other hand, a reference to an immutable object can be freely shared without having to worry that the referenced object will be modified, which can offer a performance advantage over mutable objects, as the next section illustrates.

Mutable Objects Have Their Own Temporary Object Problems

In the RegExpMatcher example, you saw that when a method had a return type of String, it usually necessitated the creation of a new String object. One of the problems with BadRegExpMatcher was that match() returned an object rather than a primitive type -- but just because a method returns an object, doesn't mean that a new object must be created. Consider the geometry classes in java.awt such as Point and Rectangle. A Rectangle is just a container of four integers (x, y, width, and height). The AWT Component class stores the component location and returns it as a Rectangle through the getBounds() accessor method:

public class Component {
  public Rectangle getBounds();

In the example above, the getBounds() method is really an accessor -- it simply makes available some state information that is internal to Component. Does getBounds() have to create the Rectangle it will return? Maybe. Consider this possible implementation of getBounds():

public class Component {
  protected Rectangle myBounds;

  public Rectangle getBounds()  { return myBounds; }

When a caller calls getBounds() in the above example, no new objects are created -- since the component already knows where it is -- so getBounds is quite efficient. However, Rectangle's mutability creates other problems. What happens when a caller executes the following?

public Rectangle getBounds() { 
 return new Rectangle(myBounds.x, myBounds.y, 
                      myBounds.height, myBounds.width

But now, each call to getBounds() creates a new object, just as RegExpMatcher did. In fact, the following code fragment creates four temporary objects:

  int x = component.getBounds().x;
  int y = component.getBounds().y;
  int h = component.getBounds().height;
  int w = component.getBounds().width;

In the case of String, the object creations were required because String is immutable. But in this case, an object creation seems to be required because Rectangle is mutable. We avoided the problem with String by not using any objects in our interfaces. While that worked in the case of RegExpMatcher, that solution is not always possible or desirable. Fortunately, you can employ several techniques when designing classes that allow you to rid yourself of the too-many-small-objects problem without avoiding small objects altogether.

Object-reduction Technique 1: Add Finer-Grained Accessor Functions

In initial versions of the Swing toolkit, the creation of many temporary Point, Rectangle, and Dimension objects seriously hampered performance. While it appeared more efficient to return multiple values at once by containing them in a Point or Rectangle, the object creation was, in fact, more expensive than multiple method calls. Before the final release of Swing, that problem was ameliorated quite simply by adding some new accessor methods to Component and other classes, such as the following:

  public int getX()      { return myBounds.x; }
  public int getY()      { return myBounds.y; }
  public int getHeight() { return myBounds.height; }
  public int getWidth()  { return myBounds.width; }

Now a caller can retrieve the bounds with no object creations such as this:

  int x = component.getX();
  int y = component.getY();
  int h = component.getHeight();
  int w = component.getWidth();

The old form of getBounds() is still supported; the finer-grained accessor functions simply provide a more efficient way to complete the same objective. In effect, the interface of Rectangle has been fully exposed in the Component interface. When the Swing package was modified to support and use those finer-grained accessor functions, it resulted in many Swing operations performing nearly twice as fast as they had previously. That was significant, as GUI code is highly performance-critical -- the user waits for something to happen and indeed expects UI operations to be instantaneous.

The downside of using that technique is that your objects now have more methods and more than one way to retrieve the same information, which makes the documentation larger and more complicated, and may discourage users. But as the Swing example showed, in performance-critical situations, that optimization technique can be effective.

Technique 2: Exploit Mutability

In addition to adding primitive-valued accessor functions to Component -- like the getX() function discussed above -- Java 2 also uses another technique to reduce object creations in AWT and Swing. An alternate version of getBounds() was added to Component and other UI classes, which allows a caller to retrieve the bounds as a Rectangle, but without requiring any temporary object creation:

  public Rectangle getBounds(
  Rectangle returnVal) {
    returnVal.x = myBounds.x; 
    returnVal.y = myBounds.y;
    returnVal.height = myBounds.height;
    returnVal.width = myBounds.width;
    return returnVal;

The caller still must create a Rectangle object, but it can be reused for subsequent calls. If a caller were iterating through a collection of Component objects, it could create a single Rectangle object and reuse it for each Component. Note that the technique only works with mutable object types; you would not be able to eliminate String creations in that way.

Technique 3: Get the Best of Both Worlds

A more elegant way to solve the object-creation problem for simple classes such as Point would be to make the Point class immutable, but define a mutable subclass, as in the following example:

  public class Point {
    protected int x, y;

    public Point(int x, int y) {
     this.x = x; this.y = y; }
    public final int getX() { return x; }
    public final int getY() { return y; }

  public class MutablePoint extends Point {
    public final void setX(int x) { this.x = x; }
    public final void setY(int y) { this.y = y; }

  public class Shape {
    private MutablePoint myLocation;

    public Shape(int x, int y) 
    { myLocation = new MutablePoint(x, y); }
    public Point getLocation()       
    { return (Point) myLocation; }

In the example above, Shape can return a reference to myLocation safely because an attempt by the caller to modify the fields or call their setters will fail. (Of course, the caller could still cast the Point to a MutablePoint, but that is obviously an unsafe cast, and such callers would get what they deserve.) C++ programmers will note that the technique resembles C++'s ability to return a const reference to a Rectangle ( const Rectangle&) -- a feature that Java does not have.

That technique -- having a mutable and immutable version of a class that allows a read-only view of an object to be returned without creating a new object -- is used in the java.math.BigInteger class for the Java 1.3 class library. The MutableBigInteger class is not exposed -- it is a private type used internally by the java.math class library. But since some of BigInteger's methods (such as gcd()) are actually composed of many arithmetic operations, performing the operations in place rather than creating hundreds of temporary objects results in a huge performance improvement.


As with all performance-tuning advice, it is worth remembering that there are many cases where a program's performance is perfectly acceptable. In those cases, it is not worth sacrificing readability, maintainability, abstraction, or any other valuable program attribute to gain performance. However, since the seeds of many performance issues are sown at design time, it pays to be aware of the potential performance impact of certain design decisions. You can effectively employ the techniques provided here to reduce temporary object creation when you design classes that are likely to be used in performance-critical situations.

In Part 3, I'll look at some of the performance issues specific to distributed applications and show how to spot and eliminate them at design time.

Reprinted with permission from the March 2001 edition of JavaWorld magazine. Copyright Web Publishing Inc., an IDG Communications company. Register for editorial e-mail alerts

About the Author

Brian Goetz is a professional software developer with over 15 years of experience. He is a principal consultant at Quiotix, a software development and consulting firm located in Los Altos, Calif.