Corresponds to WLDFNotificationBean (Interface=weblogic.diagnostics.descriptor.WLDFNotificationBean) <p>Specifies whether this notification is enabled.<p> (Interface=weblogic.diagnostics.descriptor.WLDFNotificationBean Attribute=isEnabled) Corresponds to WLDFBean (Interface=weblogic.diagnostics.descriptor.WLDFBean) The name of the WebLogic Diagnostic Framework (WLDF) bean. Corresponds to WLDFSMTPNotificationBean (Interface=weblogic.diagnostics.descriptor.WLDFSMTPNotificationBean) The JNDI name of the mail session. This name must match the attribute in the corresponding MailSessionMBean. The subject for the mail message. If the subject is not specified, a subject is created from the watch notification information. The body for the mail message. If the body is not specified, a body is created from the watch notification information. The address of the recipient or recipients of the SMTP notification mail. The address uses the syntax defined in RFC822. Typical address syntax is of the form <code><i>user</i>@<i>host</i>.<i>domain</code> or <code><i>Personal Name</i></code>. An address can include multiple recipients, separated by commas or spaces. Corresponds to WLDFWatchNotificationBean (Interface=weblogic.diagnostics.descriptor.WLDFWatchNotificationBean) Specifies whether the Watch Notification component is enabled. The default notification severity level for all watches. When a watch triggers, the severity level is delivered with the notification. The threshold severity level of log messages evaluated by log watch rules. Messages with a lower severity than this value will be ignored and not evaluated against the watch rules. The watches defined in this deployment. The Image notifications defined in this deployment. The JMS notifications defined in this deployment. The JMX notifications defined in this deployment. The SMTP notifications defined in this deployment. The SNMP notifications defined in this deployment. Corresponds to WLDFWatchBean (Interface=weblogic.diagnostics.descriptor.WLDFWatchBean) Specifies whether this watch is enabled. The rule-expression type for the watch: <code>HARVESTER_RULE_TYPE</code> refers to harvested data, <code>LOG_RULE_TYPE</code> refers to log entry data, and <code>EVENT_DATA_RULE_TYPE</code> refers to instrumentation event data. The default type is <code>HARVESTER_RULE_TYPE</code>. The rule expression used to evaluate the watch. The severity level of the notifications sent when this watch evaluates to <code>true</code>. When set, this level overrides the default value provided in the parent MBean. However, if no severity level is set (null), the value provided in the parent MBean is returned. The alarm type for the watch: manual or automatic. The default alarm type is manual. For automatic alarms, the time period, in milliseconds, to wait after the watch evaluates to <code>true</code> before the alarm is automatically reset. (Interface=weblogic.diagnostics.descriptor.WLDFWatchBean Attribute=getNotificationsAsString) Corresponds to WLDFImageNotificationBean (Interface=weblogic.diagnostics.descriptor.WLDFImageNotificationBean) The directory where diagnostic images are stored. The default directory, relative to a server's root directory, is <code>./logs/diagnostic_images</code>. The length of time, in minutes, during which no diagnostic images requests will be accepted; that is, the minimum amount of time between image capture requests. Corresponds to WLDFJMSNotificationBean (Interface=weblogic.diagnostics.descriptor.WLDFJMSNotificationBean) The JNDI name of the JMS destination. The JNDI name of the JMS connection factory. If a name has not been specified, the default JMS connection factory is used. Corresponds to WLDFJMXNotificationBean (Interface=weblogic.diagnostics.descriptor.WLDFJMXNotificationBean) The JMX notification type assigned to the resulting JMX notification. Corresponds to WLDFSNMPNotificationBean (Interface=weblogic.diagnostics.descriptor.WLDFSNMPNotificationBean) Corresponds to WLDFHarvesterBean (Interface=weblogic.diagnostics.descriptor.WLDFHarvesterBean) Specifies whether the Harvester component is enabled. The interval, in milliseconds, between samples. The list of MBeans representing the harvested types. Corresponds to WLDFHarvestedTypeBean (Interface=weblogic.diagnostics.descriptor.WLDFHarvestedTypeBean) Specifies whether this type is enabled. Note that enabling a type will have no effect unless the Harvester component is also enabled. Specifies whether this type is known at startup. Normally, if a type is not available, the Harvester will keep looking for it. If a type is designated as "known", the Harvester issues a validation fault if the type cannot be immediately resolved. The harvested attributes for this type. If a list of attributes is provided, only those attributes are harvested; otherwise all harvestable attributes are harvested. The harvested instances of this type. Corresponds to WLDFInstrumentationBean (Interface=weblogic.diagnostics.descriptor.WLDFInstrumentationBean) The state of the instrumentation behavior for the server or application. If <code>false</code>, there will no weaving (inserting of diagnostic code) in the application or server code during class loading. In addition, if woven classes are already loaded, disabling instrumentation will disable all the monitors in this scope. Pattern expressions for classes that are included in this instrumentation scope. If specified, only included classes will be instrumented. If not specified, all classes loaded within the application and which are not explicitly excluded are eligible for instrumentation. Pattern expressions for classes that will be excluded from this instrumentation scope. If specified, classes matching given patterns will not be instrumented. The diagnostic monitors defined in this instrumentation scope. Corresponds to WLDFInstrumentationMonitorBean (Interface=weblogic.diagnostics.descriptor.WLDFInstrumentationMonitorBean) Optional description of this monitor. Specifies whether the monitor and its associated diagnostics actions are enabled. The dye mask for all diagnostic actions associated with this monitor. Specifies whether dye filtering is enabled for the diagnostic actions associated with this monitor. Properties for this monitor. Properties are name=value pairs, one pair per line. For example, <code>USER1=foo\nADDR1=127.0.0.1</code>. The diagnostic actions attached to this monitor. Actions are relevant only for delegating and custom monitors. Valid actions are: <code>TraceAction</code>, <code>DisplayArgumentsAction</code>, <code>StackDumpAction</code>, <code>ThreadDumpAction</code>, and <code>TraceElapsedTimeAction</code>. Attached actions are applied at selected locations: <code>before</code>, <code>after</code>, or <code>around</code> pointcuts. This is relevant only for custom monitors. (A location where diagnostic code is added is called a diagnostic joinpoint. A set of joinpoints, identified by an expression, is called a pointcut.) The pointcut expression for this monitor. (A location where diagnostic code is added is called a diagnostic joinpoint. A set of joinpoints, identified by an expression, is called a pointcut.) Pattern expressions for classes that are included for this instrumentation monitor. If specified, only included classes will be instrumented with this monitor. If not specified, all classes loaded within the application and which are not explicitly excluded are eligible for instrumentation with this monitor. Pattern expressions for classes that will be excluded for this instrumentation monitor. If specified, classes matching given patterns will not be instrumented with this monitor. Corresponds to WLDFResourceBean (Interface=weblogic.diagnostics.descriptor.WLDFResourceBean) The Diagnostic Instrumentation configuration for this deployment. The Diagnostic Harvester configuration for this deployment. The Diagnostic Watch and Notification configuration for this deployment.