Name of Product: Oracle Java Platform Micro Edition Software Development Kit 3.2

Alternate Titles:
  • Oracle Java ME SDK
 Last Updated: 02-Aug-2012

This VPAT applies to only version 3.2. It does not apply to any versions of Oracle Java Platform Micro Edition Software Development Kit after this.
 This VPAT has been superseded by Oracle Java Platform Micro Edition Software Development Kit 3.3

Oracle Java ME Software Development Kit (SDK ) is a toolbox for developing mobile applications. It integrates Connected Limited Device Configuration (CLDC) and Connected Device Configuration (CDC) into one SDK.

Java ME SDK 3.2 is the successor to the popular Java Wireless Toolkit 2.5.2 and Java Toolkit 1.1 for CDC.

It provides device emulation, enhancements for NetBeans and Eclipse IDEs and a set of utilities for rapid development of Java ME Applications.

Due to Java ME having to meet the criteria specified in Java Specification Requests (JSRs), it is not possible to meet all accessibility criteria as they are in conflict with the JSR. To meet the criteria would require a fundamental alteration of the product.

The information below describes this product's ability to support the applicable U.S. Section 508 standards, subject to Oracle's interpretation of those standards and the remarks in this document. This product does not display 'web pages', thus the Web Content Accessibility Guidelines (WCAG) 1.0 are not applicable.

For more information regarding the accessibility status of this product or other Oracle products, see https://www.oracle.com/accessibility/ or contact: accessible_ww@oracle.com.

 


Note: This document is provided for information purposes only and the contents hereof are subject to change without notice. Oracle Corporation does not warrant that this document is error free, nor does it provide any other warranties or conditions, whether expressed orally or implied in law, including implied warranties and conditions of merchantability or fitness for a particular purpose. Oracle Corporation specifically disclaims any liability with respect to this document and no contractual obligations are formed either directly or indirectly by this document. Oracle further makes no representation concerning the ability of assistive technologies or other products to interoperate with Oracle products. This VPAT addresses the named product(s) only and not prerequisite products for which Oracle supplies restricted use licenses.

Section 1194.21 Software Applications and Operating Systems
Criteria
Supporting Features
Remarks (e.g., definition, equivalent facilitation, scope of support provided)
1194.21(a) When software is designed to run on a system that has a keyboard, product functions shall be executable from a keyboard where the function itself or the result of performing a function can be discerned textually. Product has been developed to conform to this standard subject to the remarks on the right.

The Platform defines a logical keyboard operation specification. UI Toolkit components meet this specification. All aspects of the core product support this behavior, except for the phone emulated content, which runs on the CLDC/MIDP reference implementation and must support that specification.

 
1194.21(b) Applications shall not disrupt or disable activated features of other products that are identified as accessibility features, where those features are developed and documented according to industry standards. Applications also shall not disrupt or disable activated features of any operating system that are identified as accessibility features where the application programming interface for those accessibility features has been documented by the manufacturer of the operating system and is available to the product developer. Product has been developed to conform to this standard subject to the remarks on the right.

The core product was tested for response to the following operating system accessibility features:

  • Sticky Keys, Slow Keys, Filter Keys, Bounce Keys, and Toggle Keys
  • Sound Sentry
  • High Contrast and Large Print themes.

Not applicable to phone emulated content, which runs on the CLDC/MIDP reference implementation and must support that specification.
1194.21(c) A well-defined on-screen indication of the current focus shall be provided that moves among interactive interface elements as the input focus changes. The focus shall be programmatically exposed so that assistive technology can track focus and focus changes. Product has been developed to conform to this standard subject to the remarks on the right.

The core product is composed of components that have a well defined visual focus indicator which is programmatically exposed via the Java Accessibility API. The product's editable text fields have a well defined visual caret indicator displayed, which programmatically exposed via the Java Accessibility API.

The core product was tested for:

  • Visual indication of the position of the cursor within text, and visual indication of the focused component, including with the High Contrast and Large Print themes
    • Current focused component and caret location is programmatically exposed via the Java Accessibility API

Partially applicable to phone emulated content, which runs on the CLDC/MIDP reference implementation and must support that specification (applicable to emulated text editor components).

The phone emulated content was tested for:

  • Visual indication of the position of the cursor within text, and visual indication of the focused component.
1194.21(d) Sufficient information about a user interface element including the identity, operation and state of the element shall be available to assistive technology. When an image represents a program element, the information conveyed by the image must also be available in text. Product has been developed to conform to this standard subject to the remarks on the right.

The core product is composed of components that expose the AccessibleName, AccessibleRole, AccessibleStateSet, AccessibleValue, and AccessibleIcon interfaces as appropriate via the Java Accessibility API.

The core product was tested for:

    The AccessibleName, AccessibleRole, and AccessibleStateSet of controls is programmatically exposed via the Java Accessibility API
    The AccessibleValue of controls that display one of a range of values is programmatically exposed via the Java Accessibility API
    The AccessibleIcon of controls containing an ImageIcon or other image is programmatically exposed via the Java Accessibility API

Not applicable to phone emulated content, which runs on the CLDC/MIDP reference implementation and must support that specifications.
1194.21(e) When bitmap images are used to identify controls, status indicators, or other programmatic elements, the meaning assigned to those images shall be consistent throughout an application's performance. Product has been developed to conform to this standard subject to the remarks on the right.

The core product was tested for:

  • User interface components that display a non-decorative image have an AccessibleName associated with them, and if necessary an AccessibleDescription.
  • Decorative images are either not rendered as accessible user interface components, or have a null AccessibleName and a null AccessibleDescription.
  • Images are used consistently throughout the product.

Not applicable to phone emulated content, which runs on the CLDC/MIDP reference implementation and must support that specifications.
1194.21(f) Textual information shall be provided through operating system functions for displaying text. The minimum information that shall be made available is text content, text input caret location, and text attributes. Product has been developed to conform to this standard subject to the remarks on the right.

The core product was tested for: User interface components that display text either:

  • expose a copy of their text as the AccessibleName (e.g. the text of a JButton), and/or
  • expose their text via the AccessibleText interface.

Not applicable to phone emulated content, which runs on the CLDC/MIDP reference implementation and must support that specifications.
1194.21(g) Applications shall not override user selected contrast and color selections and other individual display attributes. Product has been developed to conform to this standard subject to the remarks on the right.

The core product was tested for:

  • User interface components respect the platform Look and Feel, OS-level color and contrast settings are honored by the product.

Not applicable to phone emulated content, which runs on the CLDC/MIDP reference implementation and must support that specifications.
1194.21(h) When animation is displayed, the information shall be displayable in at least one non-animated presentation mode at the option of the user. Product has been developed to conform to this standard subject to the remarks on the right.

The core product does not contain moving, blinking or scrolling information and does not contain content that is pure decoration.
Not applicable to phone emulated content, which runs on the CLDC/MIDP reference implementation and must support that specifications.
1194.21(i) Color coding shall not be used as the only means of conveying information, indicating an action, prompting a response, or distinguishing a visual element. Product has been developed to conform to this standard subject to the remarks on the right.

In the core product color, or font styles, are not used as the only visual means of conveying information.
Not applicable to phone emulated content, which runs on the CLDC/MIDP reference implementation and must support that specifications.
1194.21(j) When a product permits a user to adjust color and contrast settings, a variety of color selections capable of producing a range of contrast levels shall be provided. Product has been developed to conform to this standard subject to the remarks on the right.

The core product was tested for:

  •     Text and images of text in non-disabled controls have a luminosity contrast ratio of at least 4.5:1. Large scale text has a minimum ratio of at least 3:1

Not applicable to phone emulated content, which runs on the CLDC/MIDP reference implementation and must support that specifications.
1194.21(k) Software shall not use flashing or blinking text, objects, or other elements having a flash or blink frequency greater than 2 Hz and lower than 55 Hz. Product has been developed to conform to this standard subject to the remarks on the right.

The product was tested for:

  • No portion of the screen flickers or flashes with a frequency between 2 Hz and 55 Hz, with the exception of the text insertion caret.
1194.21(l) When electronic forms are used, the form shall allow people using assistive technology to access the information, field elements, and functionality required for completion and submission of the form, including all directions and cues. Product has been developed to conform to this standard subject to the remarks on the right.

The core product was tested for:

  • User interface component labels are associated with the fields they are labeling.
  • Edit text fields have a label associated with them.
  • Label associations are exposed via the AccessibleRelation interface to assistive technologies.
  • Form controls expose an appropriate AccessibleName to assistive technologies.

Not applicable to phone emulated content, which runs on the CLDC/MIDP reference implementation and must support that specifications.

back to top
 

Section 1194.22 Web-based Internet Information and Applications
Criteria
Supporting Features
Remarks (e.g., definition, equivalent facilitation, scope of support provided)
1194.22(a) A text equivalent for every non-text element shall be provided (e.g., via "alt", "longdesc", or in element content). Not Applicable  
1194.22(b) Equivalent alternatives for any multimedia presentation shall be synchronized with the presentation. Not Applicable  
1194.22(c) Web pages shall be designed so that all information conveyed with color is also available without color, for example from context or markup. Not Applicable  
1194.22(d) Documents shall be organized so they are readable without requiring an associated style sheet. Not Applicable  
1194.22(e) Redundant text links shall be provided for each active region of a server-side image map. Not Applicable  
1194.22(f) Client-side image maps shall be provided instead of server-side image maps except where the regions cannot be defined with an available geometric shape. Not Applicable  
1194.22(g) Row and column headers shall be identified for data tables. Not Applicable  
1194.22(h) Markup shall be used to associate data cells and header cells for data tables that have two or more logical levels of row or column headers. Not Applicable  
1194.22(i) Frames shall be titled with text that facilitates frame identification and navigation. Not Applicable  
1194.22(j) Pages shall be designed to avoid causing the screen to flicker with a frequency greater than 2 Hz and lower than 55 Hz. Not Applicable  
1194.22(k) A text-only page, with equivalent information or functionality, shall be provided to make a web site comply with the provisions of this part, when compliance cannot be accomplished in any other way. The content of the text-only page shall be updated whenever the primary page changes. Not Applicable  
1194.22(l) When pages utilize scripting languages to display content, or to create interface elements, the information provided by the script shall be identified with functional text that can be read by assistive technology. Not Applicable  
1194.22(m) When a web page requires that an applet, plug-in or other application be present on the client system to interpret page content, the page must provide a link to a plug-in or applet that complies with §1194.21(a) through (l). Not Applicable  
1194.22(n) When electronic forms are designed to be completed on-line, the form shall allow people using assistive technology to access the information, field elements, and functionality required for completion and submission of the form, including all directions and cues. Not Applicable  
1194.22(o) A method shall be provided that permits users to skip repetitive navigation links. Not Applicable  
1194.22(p) When a timed response is required, the user shall be alerted and given sufficient time to indicate more time is required. Not Applicable  

Note to 1194.22: The Board interprets paragraphs (a) through (k) of this section as consistent with the following priority 1 Checkpoints of the Web Content Accessibility Guidelines 1.0 (WCAG 1.0) (May 5 1999) published by the Web Accessibility Initiative of the World Wide Web Consortium: Paragraph (a) - 1.1, (b) - 1.4, (c) - 2.1, (d) - 6.1, (e) - 1.2, (f) - 9.1, (g) - 5.1, (h) - 5.2, (i) - 12.1, (j) - 7.1, (k) - 11.4.

back to top
 

Section 1194.23 Telecommunications Products
Criteria
Supporting Features
Remarks (e.g., definition, equivalent facilitation, scope of support provided)
1194.23(a) Telecommunications products or systems which provide a function allowing voice communication and which do not themselves provide a TTY functionality shall provide a standard non-acoustic connection point for TTYs. Microphones shall be capable of being turned on and off to allow the user to intermix speech with TTY use. Not Applicable  
1194.23(b) Telecommunications products which include voice communication functionality shall support all commonly used cross-manufacturer non-proprietary standard TTY signal protocols. Not Applicable  
1194.23(c) Voice mail, auto-attendant, and interactive voice response telecommunications systems shall be usable by TTY users with their TTYs. Not Applicable  
1194.23(d) Voice mail, messaging, auto-attendant, and interactive voice response telecommunications systems that require a response from a user within a time interval, shall give an alert when the time interval is about to run out, and shall provide sufficient time for the user to indicate more time is required. Not Applicable  
1194.23(e) Where provided, caller identification and similar telecommunications functions shall also be available for users of TTYs, and for users who cannot see displays. Not Applicable  
1194.23(f) For transmitted voice signals, telecommunications products shall provide a gain adjustable up to a minimum of 20 dB. For incremental volume control, at least one intermediate step of 12 dB of gain shall be provided. Not Applicable  
1194.23(g) If the telecommunications product allows a user to adjust the receive volume, a function shall be provided to automatically reset the volume to the default level after every use. Not Applicable  
1194.23(h) Where a telecommunications product delivers output by an audio transducer which is normally held up to the ear, a means for effective magnetic wireless coupling to hearing technologies shall be provided. Not Applicable  
1194.23(i) Interference to hearing technologies (including hearing aids, cochlear implants, and assistive listening devices) shall be reduced to the lowest possible level that allows a user of hearing technologies to utilize the telecommunications product. Not Applicable  
1194.23(j) Products that transmit or conduct information or communication, shall pass through cross-manufacturer, non-proprietary, industry-standard codes, translation protocols, formats or other information necessary to provide the information or communication in a usable format. Technologies which use encoding, signal compression, format transformation, or similar techniques shall not remove information needed for access or shall restore it upon delivery. Not Applicable  
1194.23(k)(1) For products which have mechanically operated controls or keys, controls and keys shall be tactilely discernible without activating the controls or keys. Not Applicable  
1194.23(k)(2) For products which have mechanically operated controls or keys, controls do not require tight grasping, pinching or twisting of the wrist to operate. Not Applicable  
1194.23(k)(3) If key repeat is supported, the delay before repeat shall be adjustable to at least 2 seconds. Key repeat rate shall be adjustable to 2 seconds per character. Not Applicable  
1194.23(k)(4) The status of all locking or toggle controls or keys shall be visually discernible, and discernible either through touch or sound. Not Applicable  

back to top
 

Section 1194.24 Video and Multimedia Products
Criteria
Supporting Features
Remarks (e.g., definition, equivalent facilitation, scope of support provided)
1194.24(a) All analog television displays 13 inches and larger, and computer equipment that includes analog television receiver or display circuitry, shall be equipped with caption decoder circuitry which appropriately receives, decodes, and displays closed captions from broadcast, cable, videotape, and DVD signals. As soon as practicable, but not later than July 1, 2002, widescreen digital television (DTV) displays measuring at least 7.8 inches vertically, DTV sets with conventional displays measuring at least 13 inches vertically, and stand-alone DTV tuners, whether or not they are marketed with display screens, and computer equipment that includes DTV receiver or display circuitry, shall be equipped with caption decoder circuitry which appropriately receives, decodes, and displays closed captions from broadcast, cable, videotape, and DVD signals. Not Applicable  
1194.24(b) Television tuners, including tuner cards for use in computers, shall be equipped with secondary audio program playback circuitry. Not Applicable  
1194.24(c) All training and informational video and multimedia productions which support the agency's mission, regardless of format, that contain speech or other audio information necessary for the comprehension of the content, shall be open or closed captioned. Not Applicable  
1194.24(d) All training and informational video and multimedia productions which support the agency's mission, regardless of format, that contain visual information necessary for the comprehension of the content, shall be audio described. Not Applicable  
1194.24(e) Display or presentation of alternate text presentation or audio descriptions shall be user-selectable unless permanent. Not Applicable  

back to top
 

Section 1194.25 Self Contained, Closed Products
Criteria
Supporting Features
Remarks (e.g., definition, equivalent facilitation, scope of support provided)
1194.25(a) Self contained products shall be usable by people with disabilities without requiring an end-user to attach assistive technology to the product. Personal headsets for private listening are not assistive technology. Not Applicable  
1194.25(b) When a timed response is required, the user shall be alerted and given sufficient time to indicate more time is required. Not Applicable  
1194.25(c) Where a product utilizes touchscreens or contact-sensitive controls, an input method shall be provided that complies with Section 1194.23 (k) (1) through (4). Not Applicable  
1194.25(d) When biometric forms of user identification or control are used, an alternative form of identification or activation, which does not require the user to possess particular biological characteristics, shall also be provided. Not Applicable  
1194.25(e) When products provide auditory output, the audio signal shall be provided at a standard signal level through an industry standard connector that will allow for private listening. The product must provide the ability to interrupt, pause, and restart the audio at anytime. Not Applicable  
1194.25(f) When products deliver voice output in a public area, incremental volume control shall be provided with output amplification up to a level of at least 65 dB. Where the ambient noise level of the environment is above 45 dB, a volume gain of at least 20 dB above the ambient level shall be user selectable. A function shall be provided to automatically reset the volume to the default level after every use. Not Applicable  
1194.25(g) Color coding shall not be used as the only means of conveying information, indicating an action, prompting a response, or distinguishing a visual element. Not Applicable  
1194.25(h) When a product permits a user to adjust color and contrast settings, a range of color selections capable of producing a variety of contrast levels shall be provided. Not Applicable  
1194.25(i) Products shall be designed to avoid causing the screen to flicker with a frequency greater than 2 Hz and lower than 55 Hz. Not Applicable  
1194.25(j)(1) The position of any operable control shall be determined with respect to a vertical plane, which is 48 inches in length, centered on the operable control, and at the maximum protrusion of the product within the 48 inch length on products which are freestanding, non-portable, and intended to be used in one location and which have operable controls. Not Applicable  
1194.25(j)(2) Where any operable control is 10 inches or less behind the reference plane, the height shall be 54 inches maximum and 15 inches minimum above the floor. Not Applicable  
1194.25(j)(3) Where any operable control is more than 10 inches and not more than 24 inches behind the reference plane, the height shall be 46 inches maximum and 15 inches minimum above the floor. Not Applicable  
1194.25(j)(4) Operable controls shall not be more than 24 inches behind the reference plane. Not Applicable  

back to top
 

Section 1194.26 Desktop and Portable Computers
Criteria
Supporting Features
Remarks (e.g., definition, equivalent facilitation, scope of support provided)
1194.26(a) All mechanically operated controls and keys shall comply with Section 1194.23 (k) (1) through (4). Not Applicable  
1194.26(b) If a product utilizes touchscreens or touch-operated controls, an input method shall be provided that complies with Section 1194.23 (k) (1) through (4). Not Applicable  
1194.26(c) When biometric forms of user identification or control are used, an alternative form of identification or activation, which does not require the user to possess particular biological characteristics, shall also be provided. Not Applicable  
1194.26(d) Where provided, at least one of each type of expansion slots, ports and connectors shall comply with publicly available industry standards. Not Applicable  

back to top
 

Section 1194.31 Functional Performance Criteria
Criteria
Supporting Features
Remarks (e.g., definition, equivalent facilitation, scope of support provided)
1194.31(a) At least one mode of operation and information retrieval that does not require user vision shall be provided, or support for assistive technology used by people who are blind or visually impaired shall be provided. Yes Subject to the information provided in this document, this product has been developed to conform to the applicable technical provisions of the 508 standards.
 
1194.31(b) At least one mode of operation and information retrieval that does not require visual acuity greater than 20/70 shall be provided in audio and enlarged print output working together or independently, or support for assistive technology used by people who are visually impaired shall be provided. Yes Subject to the information provided in this document, this product has been developed to conform to the applicable technical provisions of the 508 standards. 
1194.31(c) At least one mode of operation and information retrieval that does not require user hearing shall be provided, or support for assistive technology used by people who are deaf or hard of hearing shall be provided. Yes Subject to the information provided in this document, this product has been developed to conform to the applicable technical provisions of the 508 standards. 
1194.31(d) Where audio information is important for the use of a product, at least one mode of operation and information retrieval shall be provided in an enhanced auditory fashion, or support for assistive hearing devices shall be provided. Yes Subject to the information provided in this document, this product has been developed to conform to the applicable technical provisions of the 508 standards. 
1194.31(e) At least one mode of operation and information retrieval that does not require user speech shall be provided, or support for assistive technology used by people with disabilities shall be provided. Yes Subject to the information provided in this document, this product has been developed to conform to the applicable technical provisions of the 508 standards. 
1194.31(f) At least one mode of operation and information retrieval that does not require fine motor control or simultaneous actions and that is operable with limited reach and strength shall be provided. Yes Subject to the information provided in this document, this product has been developed to conform to the applicable technical provisions of the 508 standards. 

back to top
 

Section 1194.41 Information, Documentation and Support
Criteria
Supporting Features
Remarks (e.g., definition, equivalent facilitation, scope of support provided)
1194.41(a) Product support documentation provided to end-users shall be made available in alternate formats upon request, at no additional charge. Documentation for this product is available in accessible electronic format.  
1194.41(b) End-users shall have access to a description of the accessibility and compatibility features of products in alternate formats or alternate methods upon request, at no additional charge. Documentation for this product is available in accessible electronic format.  
1194.41(c) Support services for products shall accommodate the communication needs of end-users with disabilities. Oracle customers have access to electronic support through My Oracle Support or by calling Oracle Support at 1.800.223.1711. Hearing-impaired customers in the U.S. who wish to speak to an Oracle Support representative may use a telecommunications relay service (TRS). Information about the TRS is available at http://www.fcc.gov/cgb/consumerfacts/trs.html, and a list of telephone numbers is available at http://www.fcc.gov/cgb/dro/trsphonebk.html. International hearing-impaired customers should use the TRS at +1.605.224.1837. An Oracle Support engineer will respond to technical issues according to the standard service request process.   

back to top