| Type: |
Server System |
| Manufacturer: |
IBM |
| Model: |
System x3650 M3 (7945) |
| Support: |
Solaris Premier Subscription |
| Runs on OS Versions: |
Solaris 10 10/09 to Solaris 10 8/11 (Certified)
Oracle Solaris 11 Express 2010.11 (Certified) |
| CPU Type: |
Intel Xeon CPU X5680@3.33GHz |
| Num CPUs: |
2 |
| Num Cores (per CPU): |
6 |
| Chipset: |
Intel 5520 Chipset |
| 64-bit: |
true |
BIOS:
Firmware Maker and Version |
UEFI: IBM D6E145FUS-1.07 04/26/2010, IMM: IBM YU0057H-1.10 03/03/2010 |
BIOS:
Non-Standard Settings |
See General Notes section |
| Test Suite: |
true
(May not apply to all OS Revisions. Please refer to 'General Notes') |
| General Notes: |
This server is certified on Solaris 10 10/09
CPU: dual 6-core Intel Xeon CPU X5680 3.33GHz
ServerRAID MR5015 SAS/SATA Controller in a RAID 5 configuration
Bios/Firmware Maker and Version:
UEFI: D6E148BUS-1.08- 06/25/2010 IMM YUOO73M
Certified with the following I/O cards:
IBM 39Y6136 Intel PRO/1000 PT Quad Port Adapter
IBM 49Y4220 Broadcom NetXtreme II Quad Port Adapter
IBM 49Y4240 Intel Quad Port Ethernet Server Adapter
IBM 49Y4240 is not supported in Solaris 10 10/09 and needs patch 143910-06 or higher for it to be configured in Solaris 10 10/09.
Non-standard BIOS Setting:
There is no support for UEFI in Solaris. Booting/Installing over the net is accomplished through the legacy interface.
To configure an interface for legacy support:
Select Setup as the system is booting -> Select System Settings ->
Select Network -> Select PXE Configuration -> Select Port ->
Go to the Enable PXE item -> Select Legacy Support
-------------------------------------------------------------------------------------------------------------
This server is certified on Solaris 10 10/09
Non-standard BIOS Setting:
There is no support for UEFI in Solaris. Booting/Installing over the net is accomplished via legacy support on the network interface.
To configure an interface for legacy support:
Select Setup as the system is booting -> Select System Settings -> Select Network -> Select PXE Configuration -> Select Port -> Go to the Enable PXE item -> Change entry to Legacy Support
The certified system was configured as follows:
- 2U Rack Server Chasis
- ServerRAID MR5015 SAS/SATA (PN #46M0829) controller in a RAID 5 configuration.
- Qlogic 8Gb FC Dual-Port HBA (42D0512) |
| Submitter Company: |
Oracle America, Inc. |
| Last Updated: |
2011-05-23 |
|
'prtconf -pv' Output Information
There Are No Current Comments.
|
|
