HCL for Oracle Solaris OS

Submit Hardware | Return to Previous Page
Send Feedback to the HCL team
 
Detail
Type: Server System
Manufacturer: Dell
Model: PowerEdge R730
Runs on OS Versions: Oracle Solaris 11.2 to Oracle Solaris 11.4    Certified
CPU Type: Intel Xeon CPU E5-2699 v3 @2.30 GHz;
Intel Xeon CPU E5-2689 v4 @3.10GHz
Num CPUs: 2
Num Cores (per CPU): 18
BIOS/UEFI:
 Firmware Maker and Version
Dell Inc. 1.0.4 08/28/2014
Test Suite: true
(May not apply to all OS Revisions. Please refer to 'General Notes')
General Notes: Below controller can be used as the primary NIC & are certified on Oracle Solaris 11 OS:
NetXtreme II BCM57810 10 Gigabit Ethernet
I350 1 Gb Dual Port Network Daughter Card
82599 based X520 dual port server adapter, 10Gb, SFP+ and Direct Attach

Below controller can be used as the primary disk controller & are certified on Oracle Solaris 11 OS:
PERC H730P
NOTE: The Dell PERC H730P controller is supported in HBA Mode with this configuration using Solaris 11.3 or later.

Below controller can be used as the primary disk controller & are certified on Oracle Solaris 11 OS with SRU11.2.12.6.0
PERC H330
NOTE: The Dell PERC H330 controller is supported in HBA Mode with this configuration using Solaris 11.3 or later.

Configurations with the Intel Xeon CPU E5-2689 v4 @ 3.10GHz require Solaris 11.3 SRU6 (11.3.6.5.0) or later.
Dell also recommend BIOS "Dell Inc. 1.7.10 11/20/2015" for this CPU.
Submitter Company: Dell Inc
Last Updated: 2016-01-22

'prtconf -pv' Output Information

PCI Information: [+] Show

View the prtconf information submitted. You can see the PCI information parsed out as well.
Open 'prtconf -pv' in separate window.