Troubleshooting Guide for Java SE 6 with HotSpot VM

Document Information


1.  Diagnostic Tools and Options

2.  Detailed Tool Descriptions

3.  Troubleshooting Memory Leaks

4.  Troubleshooting System Crashes

5.  Troubleshooting Hanging or Looping Processes

6.  Integrating Signal and Exception Handling

6.1 Signal Handling on Solaris OS and Linux

6.1.1 Reducing Signal Usage

6.1.2 Alternative Signals

6.1.3 Signal Chaining

6.2 Exception Handling on Windows

6.2.1 Signal Handling in the HotSpot Virtual Machine

6.2.2 Console Handlers

7.  Submitting Bug Reports

A.  Environment Variables and System Properties

B.  Command-Line Options

C.  Fatal Error Log

D.  Summary of Tools in This Release

Chapter 6

Integrating Signal and Exception Handling

Sometimes developers have to integrate Java SE applications with code that uses signal or exception handlers. This chapter provides information on how signals are handled in the HotSpot Virtual Machine. It also describes the signal chaining facility that facilitates writing applications that need to install their own signal handlers. The signal chaining facility is available on Solaris OS and Linux.

6.1 Signal Handling on Solaris OS and Linux

The HotSpot Virtual Machine installs signal handlers to implement various features and to handle fatal error conditions. For example, in an optimization to avoid explicit null checks in cases where java.lang.NullPointerException will be thrown rarely, the SIGSEGV signal is caught and handled, and the NullPointerException is thrown.

In general there are two categories of situations where signal/traps arise.

  • Situations in which signals are expected and handled. Examples include the implicit null handling cited above. Another example is the safepoint polling mechanism, which protects a page in memory when a safepoint is required. Any thread that accesses that page causes a SIGSEGV, which results in the execution of a stub that brings the thread to a safepoint.
  • Unexpected signals. This includes a SIGSEGV when executing in VM code, JNI code, or native code. In these cases the signal is unexpected, so fatal error handling is invoked to create the error log and terminate the process.

The following table lists the signals that are currently used on Solaris OS and Linux. The mention “optional” means that the signal is not necessary when the -Xrs option is specified, as explained in 6.1.1 Reducing Signal Usage. The mention “configurable” means that alternative signals may be specified, as explained in 6.1.2 Alternative Signals. See 6.1.3 Signal Chaining for detailed information about signal chaining.

Signal Description
SIGSEGV, SIGBUS, SIGFPE, SIGPIPE, SIGILL Used in the implementation for implicit null check, and so forth.
SIGQUIT Thread dump support: To dump Java stack traces at the standard error stream. (Optional.)
SIGTERM, SIGINT, SIGHUP Used to support the shutdown hook mechanism ( java.lang.Runtime.addShutdownHook) when the VM is terminated abnormally. (Optional.)
SIGUSR1 Used in the implementation of the java.lang.Thread.interrupt method. (Configurable.) Not used starting with Solaris 10 OS. Reserved on Linux.
SIGUSR2 Used internally. (Configurable.) Not used starting with Solaris 10 OS.
SIGABRT The HotSpot VM does not handle this signal. Instead it calls the abort function after fatal error handling. If an application uses this signal then it should terminate the process to preserve the expected semantics.

6.1.1 Reducing Signal Usage

The -Xrs option instructs the HotSpot VM to reduce its signal usage. With this option fewer signals are used, although the VM installs its own signal handler for essential signals such as SIGSEGV. In the above table the signals tagged as optional are not used when the -Xrs option is specified. Specifying this option means that the shutdown hook mechanism will not execute if the process receives a SIGQUIT, SIGTERM, SIGINT, or SIGHUP. Shutdown hooks will execute, as expected, if the VM terminates normally (last non-daemon thread completes or the System.exit method is used).

6.1.2 Alternative Signals

On Solaris 8 and 9 OS, the -XX:+UseAltSigs option can be used to instruct the HotSpot VM to use alternative signals to SIGUSR1 and SIGUSR2. Starting with Solaris 10 OS, this option is ignored, as the operating system reserves two additional signals (called SIGJVM1 and SIGJVM2).

On Linux, the handler for SIGUSR1 cannot be overridden. SIGUSR2 is used to implement suspend and resume. However it is possible to specify an alternative signal to be used instead of SIGUSR2. This is done by specifying the _JAVA_SR_SIGNUM environment variable. If this environment variable is set, it must be set to a value larger than the maximum of SIGSEGV and SIGBUS.

6.1.3 Signal Chaining

If an application with native code requires its own signal handlers, then it might need to be used with the signal chaining facility. The signal chaining facility offers the following features:

  • Support for pre-installed signal handlers when the HotSpot VM is created.

    When the VM is first created, existing signal handlers, that is, handlers for signals that are used by the VM, are saved. During execution, when any of these signals are raised and found not to be targeted at the Java HotSpot VM, the pre-installed handlers are invoked. In other words, pre-installed handlers are chained behind the VM handlers for these signals.

  • Support for signal handler installation after the HotSpot VM is created, either inside JNI code or from another native thread.

    An application can link and load the shared library before libc/libthread/libpthread. This library ensures that calls such as signal(), sigset(), and sigaction() are intercepted so that they do not actually replace the Java HotSpot VM's signal handlers if the handlers conflict with those already installed by the Java HotSpot VM. Instead, these calls save the new signal handlers, or chain them behind the VM-installed handlers. During execution, when any of these signals are raised and found not to be targeted at the Java HotSpot VM, the pre-installed handlers are invoked.

    If support for signal handler installation after the creation of the VM is not required, then the shared library is not needed.

    Perform one of these two procedures to use the shared library.

    • Link it with the application that creates/embeds a HotSpot VM, for example:

      cc -L -ljsig -ljvm java_application.c

    • Use the LD_PRELOAD environment variable, for example:

      export LD_PRELOAD= /; java_application(ksh)

      setenv LD_PRELOAD; java_application(csh)

    The interposed signal(), sigset(), and sigaction() return the saved signal handlers, not the signal handlers installed by the Java HotSpot VM and which are seen by the operating system.

Note that SIGUSR1 cannot be chained. If an application attempts to chain this signal on Solaris OS, then the HotSpot VM terminates with the following fatal error:

Signal chaining detected for VM interrupt signal, try -XX:+UseAltSigs

In addition, the SIGQUIT, SIGTERM, SIGINT, and SIGHUP signals cannot be chained. If the application needs to handle these signals, consider using the -Xrs option.

On Solaris OS, the SIGUSR2 signal can be chained, but only for non-Java and non-VM threads; that is, it can only be used for native threads created by the application that do not attach to the VM.

6.2 Exception Handling on Windows

On Windows, an exception is an event that occurs during the execution of a program. There are two kinds of exceptions: hardware exceptions and software exceptions. Hardware exceptions are comparable to signals such as SIGSEGV and SIGKILL on Solaris OS and Linux. Software exceptions are initiated explicitly by applications or the operating system using the RaiseException() API.

On Windows, the mechanism for handling both hardware and software exceptions is called structured exception handling (SEH). This is stack frame-based exception handling similar to the C++ and Java exception handling mechanism. In C++ the __try and __except keywords are used to guard a section of code that might result in an exception, as in the following example:

__try {

     // guarded body of code
 } __except (filter-expression) {
     // exception-handler block

The __except block is filtered by a filter expression that uses an exception code (integer code returned by the GetExceptionCode() API), or exception information ( GetExceptionInformation() API), or both.

The filter expression should evaluate to one of the following values:


    The filter expression has repaired the situation, and execution continues where the exception occurred. Unlike some exception schemes, SEH supports the resumption model as well. This is much like Unix signal handling in the sense that after the signal handler finishes, the execution continues where the program was interrupted. The difference is that the handler in this case is just the filter expression itself and not the __except block. However, the filter expression might also involve a function call.


    The current handler cannot handle this exception. Continue the handler search for the next handler. This is similar to the catch block not matching an exception type in C++ and Java.


    The current handler matches and can handle the exception. The __except block is executed.

The __try and __finally keywords are used to construct a termination handler as shown below.

__try {

    // guarded body of code  
} __finally { 
    // __finally block  

When control leaves the __try block (after exception or without exception), the __finally block is executed. Inside the __finally block, the AbnormalTermination() API can be called to test whether control continued after the exception or not.

Windows programs can also install a top-level unhandled exception filter function to catch exceptions that are not handled in a __try/ __except block. This function is installed on a process-wide basis using the SetUnhandledExceptionFilter() API. If there is no handler for an exception, then UnhandledExceptionFilter() is called, and this will call the top-level unhandled exception filter function, if any, to catch that exception. This function also shows a message box to notify the user about the unhandled exception.

Windows exceptions are comparable to Unix synchronous signals that are attributable to the current execution stream. In Windows, asynchronous events such as console events (for example, the user pressing Ctrl-C at the console) are handled by the console control handler registered using the SetConsoleCtlHandler() API.

If an application uses the signal() API on Windows, then the C runtime library (CRT) maps both Windows exceptions and console events to appropriate signals or C runtime errors. For example, CRT maps Ctrl-C to SIGINT and all other console events to SIGBREAK. Similarly, if you register the SIGSEGV handler, the C runtime library translates the corresponding exception to a signal. The CRT library startup code implements a __try/ __except block around the main() function. The CRT's exception filter function (named _XcptFilter) maps the Win32 exceptions to signals and dispatches signals to their appropriate handlers. If a signal's handler is set to SIG_DFL (default handling), then _XcptFilter calls UnhandledExceptionFilter.

With Windows XP or Windows 2003, the vectored exception handling mechanism can also be used. Vectored handlers are not frame-based handlers. A program can register zero or more vectored exception handlers using the AddVectoredExceptionHandler API. Vectored handlers are invoked before structured exception handlers, if any, are invoked, regardless of where the exception occurred.

Vectored exception handler returns one of the following values:

  • EXCEPTION_CONTINUE_EXECUTION: Skip next vectored and SEH handlers.

  • EXCEPTION_CONTINUE_SEARCH: Continue next vectored or SEH handler.

Refer to the Microsoft web site at for further information on Windows exception handling.

6.2.1 Signal Handling in the HotSpot Virtual Machine

The HotSpot VM installs a top-level exception handler using the SetUnhandledExceptionFilter API (or the AddVectoredExceptionHandler API for 64-bit) during VM initialization.

It also installs win32 SEH using a __try / __except block in C++ around the thread (internal) start function call for each thread created.

Finally, it installs an exception handler around JNI functions.

If an application must handle structured exceptions in JNI code, it can use __try / __except statements in C++. However, if it must use the vectored exception handler in JNI code then the handler must return EXCEPTION_CONTINUE_SEARCH to continue to the VMs exception handler.

In general, there are two categories of situations in which exceptions arise:

  • Situations where signals are expected and handled. Examples include the implict null handling cited above where accessing a null causes an EXCEPTION_ACCESS_VIOLATION, which is handled.

  • Unexpected exceptions. An example is EXCEPTION_ACCESS_VIOLATION when executing in VM code or in JNI or native code. In these cases the signal is unexpected, and fatal error handling is invoked to create the error log and terminate the process.

6.2.2 Console Handlers

The HotSpot Virtual Machine registers console events as shown in the following table.

Console Event Signal Usage
CTRL_C_EVENT SIGINT Terminate process. (optional)
CTRL_CLOSE_EVENT CTRL_LOGOFF_EVENT CTRL_SHUTDOWN_EVENT SIGTERM Used by the shutdown hook mechanism when the VM is terminated abnormally. (optional)
CTRL_BREAK_EVENT SIGBREAK Thread dump support. To dump Java stack traces at the standard error stream. (optional)

If an application must register its own console handler, then the -Xrs option can be used. With this option, shutdown hooks are not run on SIGTERM (with above mapping of events) and thread dump support is not available on SIGBREAK (with above mapping Ctrl-Break event).