Go to main content
Oracle Hardware Certification Test Suite 5.8

Exit Print View

Updated: November 2016
 
 

Tools in /opt/SUNWhcts/bin

The following table provides a quick reference to the tools and utilities available under /opt/SUNWhcts/bin/ directory.

Table 2  Tools Reference
Tool
Usage
Description
ftp_setup
ftp_setup [path_name]
Sets up an FTP anonymous access for using Oracle HCTS.
ftp_clean
ftp_clean
Disables Oracle HCTS FTP anonymous access.
nfs_config
nfs_config -e
Enables Oracle HCTS NFS environment.
The /export/home/nfs directory is shared.
nfs_config -r
Restores the NFS modified by Oracle HCTS to the original state.
ssh_config
ssh_config -e
Enables the SSH access for using Oracle HCTS.
ssh_config -r
Restores the SSH environment modified by Oracle HCTS to the original state.
net_svcs
net_svcs -c | -e | -r | -t
Enables or restores the network services for Oracle HCTS network testing.

Note - To run the Oracle HCTS network test cases correctly, the following services should be in the online status.

  • svc:/network/physical:default

  • svc:/network/shell:default

  • svc:/network/ftp:default

  • svc:/network/rpc/spray:default

  • svc:/network/nfs/client:default

  • svc:/network/nfs/mapid:default

The Oracle HCTS framework invokes this command automatically before starting the network test cases. In case the services listed above are not in the desired state, run this command to put these services in the correct state for Oracle HCTS network testing.
net_svcs -c
Displays the current state of the network services.
net_svcs -e
Enables services required for Oracle HCTS network testing.
net_svcs -r
Restores network services modified by Oracle HCTS to the original state.
net_svcs -t
Temporarily enables the Oracle HCTS network services, which are active until reboot.
make_mixed_mode_cd
make_mixed_mode_cd
Creates a mixed-mode CD for the CD/DVD reader certification and USB CD/DVD reader certification.
reconfigure
reconfigure
Checks and sets up the Oracle HCTS running environment. Restarts the machine and reconfigures devices.
ibgen_config
ibgen_config -i
This command installs ibgen driver on the system.
ibgen_config -r
This command removes ibgen driver from the system.
nwam_config
nwam_config -d | -r
Disables or restores the nwam service for Oracle HCTS network testing.
For Oracle Solaris 11 OS, the svc:/network/physical:nwam service should be disabled before starting the Oracle HCTS network test. The Oracle HCTS framework automatically invokes this command.
nwam_config -d
Disables the nwam service.
nwam_config -r
Restores the nwam service modified by Oracle HCTS to the original state.