Go to main content
Oracle Hardware Certification Test Suite 5.8

Exit Print View

Updated: November 2016

WiFi Certification by Using the Automatic Network Setup (DHCP)

After setting up the parameters as described in the previous section, perform the following procedure to start the WiFi certification by using the automatic network setup.

To Start a WiFi Certification Using DHCP

  1. Start the Oracle HCTS UI.
  2. If the current network setup mode is manual, set it to automatic as shown below.
    # manual network setup=false
  3. Rescan the system.
  4. Enable the DHCP network setup option.
  5. Select the wireless network with the name you set and start the certification.